Foreword
F6 SMART™ Echo – Volumetric Handheld Camera – User Guide
● Reverse Engineering and Architectural, Engineering and Construction (EaC):
Integration with leading software companies such as 3D system (Geomatics –
design X).
Designing an object based on a scanned model.
Bridging the gap between As built and As planned.
● Oil and Gas, Maritime and Aerospace:
Periodically inspection of the infrastructure to detect changes.
Capturing 3D data on off-shore platforms while in motion.
Transportations of heavy devices inside a plant.
● Gaming and Simulations:
Ergonomic design based on hybrid models – containing static and dynamic data.
Human motion capturing (also by syncing multiple F6 devices).
Full flow to VR.
● Internal Designers and Architectures:
Visualization tool for renovation.
Full flow to VR.
● Education – Providing students flexible tool for capturing both static and dynamic for
their variable researches.
● Archeology:
Scanning capability also in complete darkness in places such as caves.
Accessibility to difficult locations.
Intended Audience
This F6 SMART™ User Guide document was developed for end-users of Mantis Vision’s F6
SMART™ Camera and its associated Echo™ software.
Document Overview
This document is built out of five (5) major parts:
1. Chapter 1 – Chapter 3 are introductory chapters dedicated to Mantis Vision and its
technology, 3D scanning and the F6 SMART™ Camera, its associated Echo™ software
as well as the structure of this document.
2. Chapter 4 – Chapter 6 deals with the content of the delivered F6 SMART™ System
and its installation, setup and activation.
3. Appendixes containing complementary data for the F6 SMART™ System’s users.
To Next Page