Spawn
F6 SMART™ – Volumetric Handheld Camera – User Guide
doesn’t detect them as such. So, a low value (maybe between 5 and 7) provides a
smoothing but you will lose detail. The higher the depth-value the higher is the resulting
number of vertices of the generated mesh.
The samples per node parameter defines how many points the marching cubes algorithm
puts into one node of the resulting octree. A high value like 10 means that the algorithm
takes 10 points and puts them into the node of the octree. If you have noisy data a high
sample per node value provides a smoothing with loss of detail while a low value
(between 1.0 and 5.0) keeps the detail level high. A high value reduces the resulting
count of vertices while a low value remains them high.
Custom mesh
Custom mesh, allow you full control over meshing options.
To Next Page
Loading...