Measurement Tools
F6 SMART™ – Volumetric Handheld Camera – User Guide
Line to Line
To measure the distance between two lines, click on the Line to Line button, which will
then be highlighted in blue next to the scan. Double click on the first location, then
double-click on the second location to create the first line. Double-click again to mark the
first point of the second line, and one final time to create the second line. The distance
between the two lines appears in the Measurement History.
Measurement History
Clicking on the Close button closes the measurement that you were performing, saving it
in the Measurement History. Conversely, clicking on Clear clears the entire Measurement
History.
To Next Page
Loading...