Root NIBPT Chapter 3: Operation
www.masimo.com 57 Masimo
Additional Settings for Temperature
From the Temperature screen, touch Additional Settings, and then change any of the
following options:
Options Description
Factory
Default
Settings
User
Configurable
Settings
Unit of
Measure
The unit of measure for temperature. °F °F, °C
Probe Mode A patient-specific probe setting. Oral
Oral, Adult Ax,
Pediatric Ax
Continuous
Mode
Provides continuous temperature readings
through a direct measurement. Direct
measurement is used to continuously read
temperatures until it reaches the thermal
steady state. (unchanging).
Start None
Measurement
Timeout
Spot Check timing customization. 5 minutes
5, 10, 15, 30, 60
and 90 minutes
Note: No menu is given when rectal probe is used.
To Next Page
Loading...
