Masimo Root User Manual

Root NIBPT Chapter 5: NIBP Measurement
www.masimo.com 97 Masimo
Set Mode: Automatic
Automatic interval measurement mode will take blood pressure measurements once every
desired interval.
To measure blood pressure in Automatic interval mode
1. Ensure that the correct patient profile is selected before measurement.
WARNING: Only use Root in Neonatal mode with a neonatal blood pressure cuff to
measure blood pressure on neonates.
2. To change the patient profile, press the Main Menu icon , then select Profiles
.
Press the Profile Name to select the desired patient profile.
3. Properly place the blood pressure cuff on patient. See Cuff Selection and
Placement on page 93.
4. To enable Automatic mode, press the Main Menu icon , then select NIBP
Settings .

Masimo Root Specifications

General

Category	Medical Equipment
Display	10.1 inch touchscreen
Connectivity	WiFi, Bluetooth
Power Supply	AC power
Dimensions	26.8 cm x 22.4 cm x 5.1 cm
Ports	USB, Ethernet
Supported Parameters	SpO2, Pulse Rate
Compatibility	Masimo sensors
Model	Root