MAINTENANCE 8 - 1
D-MAXE with OI-B/OI-Nwww.maxcessintl.com MI 2-296 1 D
Wartung.fm
8 MAINTENANCE
WARNING:
Danger of injury by crushing
Maintenance work must only be performed on the D-MAXE
system when the power is turned off, the machine is stopped,
and it is protected against being turned back on.
Maintenance work No maintenance work is required on the D-MAXE Controller or
operator interface.
To clean the display on the operator interface:
Depending on how dirty the environment is, carefully wipe off
the operator interface display at regular intervals with a soft dry
cloth.
If the display becomes very dirty, a moist cloth can be used to
clean it. A mild detergent can be used to dissolve grease.
Note:
Do not use any solvents or aggressive cleaning agents to clean
the display. Doing so could damage the display.
To Next Page
Loading...
Need help?
General
