GLOSSARY 14 - 1
D-MAXE with OI-B/OI-Nwww.maxcessintl.com MI 2-296 1 D
Begriffe.fm
14 GLOSSARY
ASC (Automatic Sensor Control)
If the web is outside of the defined range of the sensor's field of
vision, guiding is stopped.
Automatic
Operating mode
The web course is automatically corrected by an actuator based
on sensor information.
Automatic calibration
The Gain and Polarity parameters are calibrated automatically.
CM (Customized Menu)
Customer-specific system menu
This system menu is only present if the D-MAXE controller has
been programmed accordingly.
Deadband
A range is defined around the guide point in the sensor field of
view in which guiding is reduced or is not active at all in the
"Automatic" operation mode.
Device
Devices refer to the drives on the D-MAXE Controllers present
on D-MAXE the network as well as any customer-specific CM
system menus or Gateways.
Drive
The drive may be the motor of an actuator, for example, which
provides the necessary correction within a control loop.
Encoder
Incremental position transducer to record positions
Hardlock
The Hardlock parameter allows you to maintain the actuator
active in its position in "Manual" mode.
Job
Jobs are types of controllers that are in principle available in a
D-MAXE system.
To Next Page
Loading...
Need help?
General
