OPERATION 4 - 16
D-MAXE with OI-B/OI-Nwww.maxcessintl.com MI 2-296 1 D
Bedienung.fm
Selection of "Jobs"
Description Jobs are types of controllers that are in principle available in a
D-MAXE system. The table on page
4-9
is a list of possible
controller types with their menu identifications that may be
active in "Automatic" mode.
From the large number of possible controller types, customer-
specific programming selects the controller types that have the
required functionality for the customer's application and makes
them available.
Menu ∙ F4 key
It is only possible to select another job in the user level in
"Manual" and "Servo-Center" modes.
The entry changes in the second place of the menu
identification depending on the job selected.
(in Example A)
To Next Page
Loading...
