Maxcess D-MAXE - Menus 1.A.6 Service

OPERATOR INTERFACE MENUS 5 - 11
D-MAXE with OI-B/OI-Nwww.maxcessintl.com MI 2-296 1 D
Menus.fm
Menus 1.a.6 Service
Description The purpose of these menus is to show information about the
D-MAXE system that is important for Customer Service.
Menu
 Key sequence for menu 1.a.6:
 Switch to menus
Input
Menu
1.a.6.1 Measuring Points
The following parameters can be displayed:
Menu
1.a.6.1.1 Power
The current values of voltages measured in the operator
interface are displayed.
1.a.6
→ Service
or
→ Press longer than 2seconds
1.a