Maxcess D-MAXE - Menu 1.A.2.3 Connect on Start

OPERATOR INTERFACE MENUS 5 - 7
D-MAXE with OI-B/OI-Nwww.maxcessintl.com MI 2-296 1 D
Menus.fm
Menu 1.a.2.3 Connect
on start ..
Description You can use menu Connect on start .. to define which "device"
will be displayed on the relevant operator interface when the
D-MAXE system starts.
Menu
 Key sequence for menu 1.a.2.3:
 Switch to the menus that describe parameter Connect on
start ..
Input
Menu
1.a.2.3.1 Connect on start ..
∙ Select between
the "device" that was detected first by this operator interface
or
the "device" that was connected most recently with this
operator interface
 Select the desired entry in the list
 Save the entry or cancel
1.a.2
→ Control Options
or
→ Press longer than 2seconds
1.a
1.a.2.3
→ Connect on start ..
or
or
or