OPERATION4 - 1
D-MAXE with OI-B/OI-N www.maxcessintl.comMI 2-296 1 D
4 OPERATION
Precondition Commissioning of the D-MAXE system must be performed as
described in Section
Commissioning, page 6-1
of these
Operating Instructions with successful completion.
Note The placeholders listed here are used in the explanations below:
x
Placeholder "x“ (in the example x = 1) is the operating mode
currently selected in the system (see
Menu identification,
page 4-8
and Section 6 page
4-4
).
y
Placeholder "y" (in the example y = A) is the job currently
selected in the system.
Safety instructions
While the D-MAXE system is in operation, the following
safety
instructions must be observed.
WARNING:
During operation, do not touch or reach close to moving parts
(rollers, web).
There is a danger of being crushed.
WARNING:
There is a danger of being cut by the web edge due to the web
material and/or the movement of the web itself.
To Next Page
Loading...
