SAFETY INSTRUCTIONS2 - 3
D-MAXE with OI-B/OI-N www.maxcessintl.comMI 2-296 1 D
∙ Only replacement parts that have been approved by Maxcess
may be used.
∙ No changes may be made to the D-MAXE system.
∙ Electrical lines must not be subjected to any mechanical
loads.
Operation
∙ Danger of injury by crushing
Do not place your hands on or near moving parts (rollers,
material web, etc.) during operation.
∙ Danger of injury due to cutting on the edge of the material
web
Do not place your hands on the edge of the (moving) material
web during operation.
∙ D-MAXE system modules damaged during operation must be
decommissioned.
Maintenance
∙ Danger of injury by crushing
Maintenance work must only be performed on the
D-MAXE system when the power is turned off, the machine is
stopped, and it is protected against being turned back on.
To Next Page
Loading...
Need help?
General
