CONTROLLER MENUS: 1Y.7 CONFIGURATION7 - 46
D-MAXE with OI-B/OI-N www.maxcessintl.comMI 2-296 1 D
1y.7 Configuration This section includes a list of menus containing information
about the D-MAXE Controller. This information is required when
ordering replacement parts or for service inquires.
"Manual" mode:
– All parameters are available.
"Servo-Center" and "Automatic" mode:
– Only selected parameters are available.
Menu
Key sequence for menus:
Menu 1y.7.1 Names
The designations of the device (D-MAXE Controller) and drive
can be changed.
Menu
1y.7.1.1 Device
Menu 1y.7.1.2 Drive
Menu 1y.7.2 Serial Number
Shows the serial number of the D-MAXE Controller
Menu 1y.7.3 FW Number
Shows the firmware number of the D-MAXE Controller
Menu 1y.7.4 SW Number
Shows the software number of the D-MAXE Controller
1y.7._
→ Select the desired menu