OPERATION4 - 19
D-MAXE with OI-B/OI-N www.maxcessintl.comMI 2-296 1 D
Enable the desired menu for the entry
(for example set the parameter
Allow offset
)
Use the ’Up-Arrow’ key and the ’Down-Arrow’ key to mark
(with a border) the entry in the list you want to select
Use the ’Right-Arrow’ key to activate the entry and the ’Left-
Arrow’ key to deactivate the entry
Save the entry with the Enter-key:
The new setting is accepted into the system
or
Press the ESC-key to cancel the entry:
The old settings are retained in the system
To Next Page
Loading...
Need help?
General
