Maxsine EP3 E Series - Safety Precautions; 1. Service conditions; 2. Wiring

I
Safety Precautions
In order to ensure proper use of this product safely, the user should be familiar with and observes
the following important items before proceeding with storage, installation, wiring, operation, inspection
or maintenance for the product.
Indicates a disoperation possibly can cause danger and physical injure or death.
Indicates a disoperation possibly can cause danger and physical injure, and may
result in damage to the product.
Indicates a prohibited actions, otherwise can cause damage, malfunction to the
product.
1. Service conditions
 Do not expose the product in moisture, caustic gas, and ignitable gas situation. Otherwise can cause an electric
shock or fire.
 Do not use the product in direct-sunlight, dust, salinity and metal powder places.
 Do not use the product in the places that has water, oil and drugs drops.
2. Wiring
 Connect the earth terminal (PE) to earth reliably, otherwise can cause an electric shock or fire.
 Never connect the input power terminals (L1, L2, L3) to 380V power supply, otherwise can result in the
equipment damage and an electric shock or fire.
 Do not connect the servo motor output terminals (U, V, W) to 3 phase AC power supply, otherwise can cause
personnel casualty or fire.
 The output terminals (U, V, W) must be connected with the servo motor connections (U, V, W) correspondently,
otherwise can result in the servomotor flying speed that may cause equipment damage and the personnel
casualty
 Please fasten the input power terminals (L1, L2, and L3) and the output terminals (U, V, W). Otherwise may
cause fire.
 Referring to wire selection guide, please install all wires with an adequate cross-section. Otherwise may cause
fire.