1
Chapter 1
Product inspection and
installment
1.1
Product inspection
This product has made the complete function test before delivery, for prevented the
product to be abnormal owing to shipping process, please make detail inspection as the
following items after breaking the seal:
Inspect the types of servo driver and servomotor and ensure that are the same types in the
order form.
Inspect the outward appearance of servo driver and servomotor to see any abrasion or
damage; if so please do not wire to the power supply.
Inspect the parts of servo driver and servomotor to see any loosen parts such as loosened
or fallen off screw.
Rotate the servomotor shaft by hand and should be smooth rotation. However, the
servomotor with holding brake is unable to rotate directly.
If there is any break down item or abnormal phenomenon mentioned above, please
contact with the dealer immediately.
1.2
Product nameplate
To Next Page
Loading...