Maxsine EP3 E Series - Page 85

5.4 Parameter description
77
P103 Digital input DI4 function
Range
Default
value
Unit Usage
-37～37 0 ALL
 Digital input DI4 function planning, refer to parameter P100 description.
P104 Digital input DI5 function
Range
Default
value
Unit Usage
-37～37 0 ALL
 Digital input DI5 function planning, refer to parameter P100 description.
P108
Digital High Speed Input 1 (HDI1)
Filter Enable
Range
Default
value
Unit Usage
0～1 0 ALL
 Parameter meaning:
0: Not enabled; 1: Enable.
P109
Digital High Speed Input 2 (HDI2)
Filter Enable
Range
Default
value
Unit Usage
0～1 0 ALL
 Parameter meaning:
0: Not enabled; 1: Enable.
P110 Digital input DI1 filter
Range
Default
value
Unit Usage
0.1～100.0 2.0 ms ALL
 DI1 input digital filtering time constant.
 The smaller the parameter value is, the faster the signal response is. The larger the
parameter value is, the slower the signal response speed is, but the stronger the noise
filtering ability is.
P111 Digital input DI2 filter
Range
Default
value
Unit Usage
0.1～100.0 2.0 ms ALL
 DI2 input digital filtering time constant. Refer to the description of parameter P110.
P112 Digital input DI3 filter
Range
Default
value
Unit Usage
0.1～100.0 2.0 ms ALL
 DI3 input digital filtering time constant. Refer to the description of parameter P110.