S
S
A
A
F
F
E
E
T
T
Y
Y
A
A
N
N
D
D
M
M
A
A
I
I
N
N
T
T
E
E
N
N
A
A
N
N
C
C
E
E
6
POWER ADAPTER
Pay attention to the following information, in order to connect
your notebook correctly:
POWER SUPPLY
*
*
Do not open the power adapter housing. When the housing is
open there is a danger of severe electric shock. It contains
no user-serviceable parts.
*
*
The electric outlet must be in the vicinity of the notebook and
within reach of the power adapter cables.
*
*
To disconnect your notebook from the power source, or set
the notebook to battery operation, remove the power cord
from the notebook’s power socket.
*
*
Only use the notebook with a power adaptor operating at
AC 115V~/60 Hz. In European countries use the notebook
at AC 220-240V~/50 Hz.
For details on power consumption, please refer to the rating
plate on the rear of your notebook. If you are unsure of the
type of power supply available at the point of use, ask your
local power company.
*
*
Use only the supplied power cord and power adapter.
*
*
If using an extension cord, make certain that it meets your
local safety requirements. If in doubt, consult an electrician.
*
*
To provide additional protection against electric shock, power
surges, lightning strikes, or other electrical damage to your
notebook, we recommend the use of a surge protector.
*
*
Firstly remove the plug, and then the connector of the
notebook, from the power source, if you want to detach
the network adapter from the mains power supply. A reverse
sequence could damage the network adapter or the notebook.
Always hold the connector firmly when removing it. Never
pull on the power cord.
CABLING
*
*
Arrange cables so no one can walk on or trip over them.
*
*
Do not place objects on any of the cables.
To Next Page
Loading...
Need help?
General