VM600 MPS hardware manual (standard version) MAMPS-HW/E xv
Edition 17 - February 2018
Hazardous voltages and the risk of electric shock
Hot surfaces and the risk of burning
Heavy objects and the risk of injury
HAZARDOUS VOLTAGES EXIST WITHIN A VM600 RACK.
W
HEN A CARD, PANEL OR POWER SUPPLY IS REMOVED FROM A VM600 RACK, THE
RACK
BACKPLANE – CONTAINING HAZARDOUS VOLTAGES – IS EXPOSED AND THERE
IS
THE RISK OF ELECTRIC SHOCK, AS INDICATED BY THE USE OF THE FOLLOWING
WARNING
LABEL ON THE EQUIPMENT:
R
EGARD ANY EXPOSED COMPONENT, CONNECTOR OR PRINTED CIRCUIT BOARD (PCB)
AS A POSSIBLE SHOCK HAZARD AND DO NOT TOUCH WHEN ENERGISED.
F
AILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN DEATH, SERIOUS INJURY,
AND/OR EQUIPMENT DAMAGE.
HOT SURFACES CAN EXIST WITHIN AND ON A VM600 RACK.
D
EPENDING ON THE AMBIENT OPERATING TEMPERATURE AND POWER CONSUMPTION,
AND THE INSTALLATION AND COOLING OF A VM600 RACK, THE TOP OF THE RACK CAN
BECOME
HOT TO TOUCH AND THERE IS THE RISK OF BURNING WHEN HANDLING THE
RACK
, AS INDICATED BY THE USE OF THE FOLLOWING WARNING LABEL ON THE
EQUIPMENT
:
R
EGARD THE TOP OF A VM600 RACK AS A HOT SURFACE AND DO NOT TOUCH
UNLESS
COOL.
F
AILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY.
A POPULATED VM600 SYSTEM RACK WITH CARDS AND RACK POWER SUPPLIES
INSTALLED
IS A HEAVY OBJECT.
D
EPENDING ON THE NUMBER OF VM600 CARDS AND RPS6U RACK POWER SUPPLIES
INSTALLED
, A VM600 SYSTEM RACK (ABE04x) CAN BE TOO HEAVY TO LIFT, LOWER
OR
OTHERWISE HANDLE MANUALLY AND THERE IS THE RISK OF INJURY DURING
INSTALLATION
OR REMOVAL.
R
EGARD A POPULATED VM600 SYSTEM RACK AS A HEAVY OBJECT AND DO NOT
HANDLE
MANUALLY UNTIL ANY RPS6U RACK POWER SUPPLIES (AND VM600 CARDS
AS
NECESSARY) HAVE BEEN REMOVED IN ORDER TO REDUCE THE WEIGHT, AS THESE
ARE
THE HEAVIEST SYSTEM COMPONENTS THAT CAN BE EASILY REMOVED.
F
AILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY.
To Next Page
Loading...
Need help?
General
