Meggitt VM600 Hardware Manual

ii VM600 MPS hardware manual (standard version) MAMPS-HW/E
Edition 17 - February 2018
REVISION RECORD SHEET
Edition
Date
of issue
Written by /
modified by
Description Signature
1 25.08.98 R. Meyer Original edition. RM
2 29.01.99 R. Meyer Extensive revision. RM
3 28.05.99 R. Meyer General revision. RM
4 09.12.99 R. Meyer General revision. RM
5 30.06.03 R. Meyer General revision. RM
6 06.10.03 R. Meyer
Networking section (Chapters 13 to 17 in Edition 5)
removed to form a separate document
(MAVM600-NET/E)
RM
7 31.03.06 N. Parker (never published) NP
8 31.08.06 N. Parker Updated for new Corporate template NP
9 15.02.08 D. Evans
Change to storage temperature specifications, slimline rack
added, CSA contents verified
DE
10 04.04.08 D. Evans
Update of processing channel structure in
chapter 4
DE
11 08.05.2012 Peter Ward
Clarified the different hot-swapping requirements for cards
in the front and cards in the rear of a rack. Updated in
accordance with the latest Meggitt brand guidelines.
PW
12 19.12.2012 Peter Ward
Added information on the IRC4 intelligent relay card.
Reorganised slot number coding information for racks and
cards. Added references to the VibroSight-based condition
monitoring cards: XMC16, XMV16, XMVS16 and XIO16T.
Fixed some minor errors and added multiple clarifications.
PW
13 16.12.2013 Peter Ward
Added a note to clarify that the ABE056 slimline rack’s DC
input wiring has not changed (2.1.3 VM600 slimline rack –
19" rack with a height of 1U (ABE056)).
Updated power supply information labels used in drawings
to the latest WEEE version (2.10 RPS6U rack power supply
(ABE04x only) and 2.11 RPS1U rack power supply
(ABE056 only)).
Added a note to clarify that for the standard version of an
ABE04x rack, the case ground (rack chassis) is connected
to the VME ground (0 V
A
) when the standard version of an
MPC4 card is installed (9.10 Grounding options).
Clarified the operation of a networked rack during the hot
swap of a card (8.4.2 Subsequent installation of cards
("hot-swapping” capability)).
Added information on the channel inhibit function
(4.6.6 Channel inhibit function and 5.7.4 Channel inhibit
function) and the dual mathematical function (7.17 Dual
mathematical function).
Clarified how the VM600 MPS software calculates S
max
(7.7 Smax measurement).
Updated the temperatures in
Appendix A Environmental specifications.
PW

Meggitt VM600 Specifications

General

Brand	Meggitt
Model	VM600
Category	Measuring Instruments
Language	English