Meggitt VM600 Hardware Manual

VM600 MPS hardware manual (standard version) MAMPS-HW/E A - 3
Edition 17 - February 2018
Operating temperatures for individual VM600 system components
ENVIRONMENTAL SPECIFICATIONS
A.2 Operating temperatures for individual VM600 system components
The operating temperatures for individual VM600 system components are given in Table A-1.
Table A-1: Operating temperatures for individual VM600 system components
25 to 65°C 20 to 65°C 0 to 65°C 0 to 70°C
ABE040 and ABE042 
ABE056 
AMC8 and IOC8T 
ASPS 
CMC16 
CPUM and IOCN

See note 1

See note 2
IOC4T 
IOC4T adaptors 
IOC16T 
IRC4 
MPC1 
MPC4 
RLC16 
RPS6U

See note 3

See note 4
XMx16 and XIO16T 
Notes
In 2015, the CPUM card was updated to use a new CPU module (PC/104) that supports two Ethernet interfaces by default.
However, this change resulted in different temperature specifications for the CPUM/IOCN card pair.
1. Earlier versions of the CPUM card (PNR 200-595-075-HHh or earlier) fitted with the MSM586EN or equivalent
CPU module have an operating temperature range of 25 to 65°C.
2. Later versions of the CPUM card (PNR 200-595-076-HHh or later) fitted with the PFM-541I or equivalent
CPU module have an operating temperature range of 20 to 65°C.
In 2016, the RPS6U rack power supply was updated to provide a higher output power of 330 W. However, this change
resulted in different temperature specifications for the power supply.
3. Earlier versions of the RPS6U rack power supply (PNR 200-582-x00-01h or earlier) that define the power as a
rated power of 300 W have an operating temperature range of 25 to 65°C.
4. Later versions of the RPS6U rack power supply (PNR 200-582-x00-02h or later) that define the power as a
total maximum output power of 330 W have an operating temperature range of 0 to 70°C.

Meggitt VM600 Specifications

General

Brand	Meggitt
Model	VM600
Category	Measuring Instruments
Language	English