8 - 2 VM600 MPS hardware manual (standard version) MAMPS-HW/E
Edition 17 - February 2018
Introduction
INSTALLATION
A CMS using the VibroSight
®
software from Meggitt Sensing Systems can use the following
hardware:
• XMC16 extended monitoring card for combustion (ABE04x only)
• XMV16 extended monitoring card for vibration (ABE04x only)
• XMVS16 extended monitoring card for vibration (ABE04x only)
• XIO16T extended input/output card, for use with the XMC16, XMV16 or
XMVS16 (ABE04x only).
NOTE: Further information on this CMS hardware can be found in the
VibroSight help (VibroSight.chm).
To Next Page
Loading...
