Meggitt VM600 Hardware Manual

2 - 30 VM600 MPS hardware manual (standard version) MAMPS-HW/E
Edition 17 - February 2018
RPS6U rack power supply (ABE04x only)
OVERVIEW OF VM600 MPS HARDWARE
2.10.9.8 AC-input (120/230 V
AC
) panel with individual inputs (mains sockets and on/off
switches)
This rear panel has two AC inputs (120/230 V
AC
) with mains sockets and on/off switches that
provide individual inputs to the AC-input version of the RPS6U power supplies in a VM600
rack.
Figure 2-23 shows:
a. The associated panel at the rear of the ABE04x rack
Rear panel ordering number: 200-582-963-NHh
(equivalent VM600SYS order option code: F630).
b. Details of the associated VM600 rack power supply wiring.
(The front panel of the AC-input version of the RPS6U rack power supply is shown in
Figure 2-15.)
A VM600 rack power supply solution using this AC-input panel is intended for use with two
AC-mains (120/230 V
AC
) supplies, that is, a non-redundant external power-supply system.

Meggitt VM600 Specifications

General

Brand	Meggitt
Model	VM600
Category	Measuring Instruments
Language	English