2 - 38 VM600 MPS hardware manual (standard version) MAMPS-HW/E
Edition 17 - February 2018
RPS6U rack power supply (ABE04x only)
OVERVIEW OF VM600 MPS HARDWARE
2.10.9.13 Combined AC-input (120/230 V
AC
) and DC-input panel with individual inputs
This rear panel has one AC input (120/230 V
AC
) with mains socket and on/off switch and one
DC input with screw-terminal connector that provide individual inputs to the AC-input version
and DC-input versions of the RPS6U power supplies in a VM600 rack.
Figure 2-28 shows:
a. The associated panel at the rear of the ABE04x rack
Rear panel ordering number: 200-582-970-NHh
(equivalent VM600SYS order option code: F700).
b. Details of the associated VM600 rack power supply wiring.
(The front panel of the AC-input version of the RPS6U rack power supply is shown in
Figure 2-15.)
A VM600 rack power supply solution using this combined AC-input and DC-input panel is
intended for use with one AC-mains (120/230 V
AC
) supply and one DC-mains supply, that is,
a non-redundant external power-supply system.