Chapter 7 Options
157
l
Guideline Cutting and Creasing Condition List for Coated Card
The conditions listed here are only guidelines and do not guarantee quality.
Cutting quality may be reduced and the blade may become worn more quickly if conditions outside these
ranges are used.
Method for changing the up height and sheet settings: "SET UP"(P. 135)
Type Functio
n
Weight Tool Blade
protrusio
n length
Press
ure
Speed Offset Up
height
SHEET
TYPE
Coated
card
Cut 310 g/m2
(Thickness
0.4 mm)
SPB-0092
Cutter for
Heavy paper
0.6 mm 300 g 20 cm/
s
0.75 mm 100 % HEAV
Y
450 g/m2
(Thickness
0.6 mm)
0.8 mm 400 g 20 cm/
s
0.75mm 100 % HEAV
Y
Crease - OPT-C0243
Creasing tool
- 500g 5 cm/s - 100 % HEAV
Y
Storing the Cutting Sheet
1
Affix the separator to the adhesive surface of the cutting sheet, sandwich it between the
reinforcing card, then place it in its bag for storage.
• Store away from high temperatures and direct sunlight.
2
Detach the sheet tables.
7
To Next Page
Loading...
Need help?
General
