MIMAKI CG-AR Series User Manual

Chapter 2 Cutting
64
1
Remove the cap from the pen holder.
• Turn in the direction indicated by the arrow in the picture.
Pen holder
2
Insert a refill cartridge into the pen holder.
• Insert the refill cartridge until it hits the pen holder.
Refill cartridge
3
Insert the spring into the refill cartridge.
Spring
4
Fix the cap by turning in the direction indicated by the arrow in the picture.
Installing a (Supply) Ballpoint Pen in the Pen Adapter (SPA-0169)
Use a ballpoint pen with a diameter of 8 to 9 mm. The ballpoint pen type may affect image quality.
Use a ballpoint pen supplied by Mimaki.

MIMAKI CG-AR Series Specifications

General

Brand	MIMAKI
Model	CG-AR Series
Category	Plotter
Language	English