MIMAKI CJV200-160 - Pinch Roller Replacement; Media Holder Replacement

Chapter 6 Maintenance
155
Pinch Roller Replacement
Replace worn or dirty pinch rollers with new ones.
• Turn off the main power and unplug the power cable before replacement.
1
Raise the clamp lever.
2
Remove the O-ring retaining the pinch rollers.
O-ring
Pinch roller
O-ring
[JV]
[CJV]
• The pinch rollers are small. Be careful to avoid dropping them into the product interior.
3
Remove the pinch roller spindle.
Pinch roller spindle
Pinch roller
[JV]
[CJV]
4
Mount new pinch rollers, and secure them using the O-ring.
Media Holder Replacement
If the media holder becomes deformed and touches the carriage or print head, replace with a new media
holder.
• Turn off the main power and unplug the power cable before replacement.
6