Chapter 6 Maintenance
158
3
Replace the media cutter.
(1) Unscrew the cutter screw.
(2) Remove the cutter.
(3) Mount a new cutter.
(4) Tighten the screw to clamp the cutter.
4
Check the position of the media cutter.
• Lift up the media cutter by hand if it has dropped down.
5
Once replacement is complete, press the [ENTER] key.
Waste Ink Tank Replacement
Ink used during head cleaning and other processes is collected in the waste ink tank at the lower right of the
machine.
This product keeps track of the waste ink level. A "Check Waste Ink Tank" message appears when the
preset level is reached. Use this a guide for replacing the waste ink tank.
To Next Page
Loading...
