MIMAKI CJV200-160 - Registering the Media

Chapter 2 Printing
67
Registering the Media
When the clamp lever is lowered with media being loaded, the Select Use Media screen is displayed.
Registration is required to use media that is not registered on the machine.
1
Select [Unregistered].
Media selection
● PVC
○ Tarpaulin
○ Unregistered
○ Unregistered
1/2
1300 mm
1600 mm
2
Select the media type.
Media Type
● PVC
○ Tarpaulin
○ Transfer paper
○ Illuminated Film
○ Cutting Sheet
3
Select the media width detection type.
• AUTO: The media width is automatically detected.
• MANUAL: The media width is manually set.
Media Detection Type
Please Select.
AUTO
MANUAL
• Media width may not be detected correctly for certain colors or types of media. When
media width cannot be detected correctly, set the media width detection method to
"MANUAL".
4
Select the media form.
• Select whether roll media or leaf media is used.
Media Operation Form
Please Select.
Roll
Leaf
• When [Roll] is selected, the Media Remain Manage screen is displayed.
5
Select the method for managing the media remaining amount.
• Select whether or not to manage the media remaining amount with the machine.
Media Remain Manage
Please Select.
ON
OFF
2