Chapter 6 Maintenance
157
5
Secure the media holder stopper with the screw.
6
Attach the maintenance cover (upper left side).
Media Cutter Replacement
Replace cutters when blades are chipped or blunt.
• Avoid touching the cutter blade. Failure to do so may result in injury.
1
On the LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station Maint.] > [Carriage Out] > [Move To Platen Right End], then press the [ENTER]
key.
• The carriage moves over the platen.
• The carriage can be moved by hand. Move the carriage slowly to a position allowing easy
access while working.
6
To Next Page
Loading...
