MIMAKI CJV200-160 - Loading the Roll Media

Chapter 2 Printing
59
Loading the Roll Media
1
Raise the clamp lever.
2
Move the rear left roll holder to the roll setting position.
• Unscrew the roll holder retaining screw, move the roll holder, then retighten the retaining screw.
"Roll Holder Setting Position"(P. 58)
3
Insert the paper core of the roll media on to the rear left roll holder.
• Push in until the paper core moves no farther.
4
Insert the rear right roll holder into the paper core.
• Unscrew the roll holder retaining screw, move the roll holder, then retighten the retaining screw.
5
Insert the media between the pinch rollers and the grit rollers.
• Inserting the media at an angle allows smooth insertion without catching or sticking.
6
Lower the clamp lever.
• Hold the media with the pinch roller and grit rollers.
2