Chapter 2 Printing
47
6.
Loading the Media
This machine can be used with roll media and leaf media. "Loading the Media"(P. 54)
7.
Adjust the number and pressure of pinch rollers to use.
Set an appropriate pressure for the set media. "Setting the Pressure and Number of Pinch Rollers to
Use"(P. 69)
8.
Setting the Heater Temperature
"Setting the Heater Temperature"(P. 70)
9.
Check the state of the print head nozzles.
"Test Printing"(P. 71)
Good example Bad example
Nozzle Deflection Nozzle clogging
10.
Clean the head to clear malfunctioning nozzles.
There are three different head cleaning methods. Choose the head cleaning method based on test print
results. "Head Cleaning"(P. 73)
2
To Next Page
Loading...
