MIMAKI JV4-180 - Skew Check

– 4.55 –
4-4-16. SKEW CHECK
[Function]
Checks the amount of paper shift caused by paper feed.
[Operation]
1) Select the TEST.
Press the
ENTER
key.
2) Select the “SKEW CHECK” pressing the
FUNCTION
key.
Press the
ENTER
key
3) Enter the value to feed the paper using the
or key.
4) Press the
ENTER
key.
Press the
key to exit from the
function.
FUNCTION
# TEST < ENT >
# TEST
SKEW CHECK < ent >
# SKEW CHECK
FEED : ∗ . ∗ ∗ m
# SKEW CHECK
∗ ∗ FEED ∗ . ∗ ∗ m ∗ ∗
Downloaded From ManualsPrinter.com Manuals