MIMAKI JV4-180 - Ink Parameter; Maintenance Parameter; Servo Parameter; Adjustment Parameter

– 4.62 –
4-5-2. INK PARAMETER 1
This is not used in the field.
Never change the value.
4-5-3. INK PARAMETER 2
This is not used in the field.
Never change the value.
4-5-4. MAINTENANCE PARAMETER
This is not used in the field.
Never change the value.
4-5-5. SERVO PARAMETER
This is not used in the field.
Never change the value.
4-5-6. ADJUSTMENT PARAMETER
Parameters are present for each waveform plot. The value of each parameter canbe changed
and stored automatically through adjustment.
4-5-7. INFORMATION PARAMETER
This is not used in the field.
Never change the value.
Downloaded From ManualsPrinter.com Manuals