– 4.64 –
4-6-2. DOWNLOAD (Computer >>> Plotter)
• To realize this function, the following item is required.
OS : Windows2000, WindowsNT
Cable: IEEE1394 interface cable, Pararel interface cable
Tool: F/W Update Tool software
[Operation]
1) Connect the plotter and the host computer
through the IEEE1394 interface cable or the
pararel interface cable.
2) Turn ON the power while holding down the
and key.
3) Download is ready.
4) Perform Download using the F/W Update Tool
software.
Receive data from the host computer.
To cancel the operation, press the
key.
5) If the operation is successfully completed, the
message shown at left appears.
6) Turn OFF the power of the plotter.
BOOT
UP&DOWNLOAD
READY!
∗ ∗ DOWNLOADING ∗ ∗
UP&DOWNLOAD END
POWER OFF
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
