MIMAKI JV4-180 - Page 158

– 6.6 –
2. Cap Y
Adjust Cap Y so that the center of the Cap agrees with the center of the head, using the
or key.
3. Cap height
Adjust the Cap height at which the Cap contacts the head, using the
or key.
4. Wiping Y
Adjust Wiping Y so that the center of the wiper agrees with the center of the head, using the
or key.
Front view, enlarged
Press the
key to move the wiper
back and forth.
The section below the
taper section of the
Cap is hidden
Downloaded From ManualsPrinter.com Manuals