MIMAKI JV4-180 - Page 45

– 3.7 –
• If the entire LCD
display flashes in
REMOTE mode, it
indicates that data have
not been received for
30 seconds or more.
• If indicates that the
battery has run out.
1) Confirm that the computer is sending
data.
2) Replace the I/F cable with a new one.
3) Replace the 1394 PCB.
4) Replace the main PCB.
1) Replace the battery with a same type.
Message Description
Corrective measures and
recovering procedures
* * REMOTE * *
(flashing display)
* * BATTERY * *
Downloaded From ManualsPrinter.com Manuals