MIMAKI JV4-180 - Page 67

– 4.9 –
In-coming
travel plot
Out-going
travel plot
Y in-coming travel,
X direction
Vertical line;
Y going-and-coming travel
Y out-going travel
X direction
Paper feed direction
#PRN. adjust2
Adjust : FINE
#PRN. adjust2
FINE : Y Si.
#PRN. adjust2
FINE : Y Re.
#PRN. adjust2
FINE : Y Bi.
#PRN. adjust2
FINE : FINAL
#PRN. adjust2
COLOR : KMC
#PRN. adjust2
FINE : Y Si.
Sample plotting of [FINE: FINAL]
1) Select the “Adjust : FINE”.
Press the
ENTER
key.
2) Select the adjustment item using the
or
key.
Press the
ENTER
key.
3) Select the color to plot.
Move the cursor using the
or key and
then select the plot color.
Select whether the selected color is plotted or not
using the
or key.
4) Start plotting with the
ENTER
key.
(Plot length: about 50mm; plot width; paper
width)
Downloaded From ManualsPrinter.com Manuals