– v –
5-1-4. X-motor assy. ........................................................................................5.6
5-1-5. X-pulley and paper feed roller (Do not disassemble) ...........................5.7
5-1-6. Y-motor assy., Y-timing long belt and Y-timing belt ...........................5.8
5-1-7. Head cover, Slider PCB and Linear encoder PCB assy. / scale ............5.9
5-1-8. Print head.............................................................................................5.12
5-1-9. Main FPC cable assy. ..........................................................................5.14
5-1-10. Cutter solenoid assy. and the paper width sensor PCB assy. ............5.15
5-1-11. Cap assy.............................................................................................5.16
5-1-12. Station sensor assy., Capping sensor assy. and Wipersensor assy. ...5.17
5-1-13. IEEE1394 PCB, Main PCB, HDC-4 Head PCB assy.,
HDC-2 Head PCB assy. and Power PCB .........................................5.19
5-1-14. Ink supply tube (inside diameter: ø2mm) .........................................5.21
CHAPTER 6 ADJUSTMENT ........................................................................ 6.1
6-1. Adjusting item list........................................................................................6.2
6-2. Adjusting item ..............................................................................................6.3
6-2-1. Adjustment of the cutter height .............................................................6.3
6-2-2. Adjustment of the station position ........................................................6.4
6-2-3. Adjustment of the Linear sensor PCB assy height ................................6.9
6-2-4. Adjustment of the Y-motor belt tension..............................................6.10
6-2-5. Adjustment of the X-motor belt tension..............................................6.11
6-2-6. Adjustment of the head (head angle / head stagger) ...........................6.12
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
