MIMAKI JV4-180 - Page 87

– 4.29 –
[Operation]
1) Select the ADJUSTMENT.
Press the
ENTER
key.
2) Select the “MEDIA COMP2” pressing the
FUNCTION
key.
Press the
ENTER
key.
Press the
key to enter correction value
without performing plotting.
3) Press the
ENTER
key to start plotting.
Press the
key to interrupt the
operation.Select the DPI using the
or
key.
4) Input the correction value the or
key.
Press the
ENTER
key to store the entered
value.
FUNCTION
# ADJUST < ENT >
# ADJUST
MEDIA COMP2 < ent >
# MEDIA COMP2
PRINT START : ent
# MEDIA COMP2
Adj. = ∗ ∗ ∗
Downloaded From ManualsPrinter.com Manuals