MIMAKI UJF-3042HG User Manual

2-6
7
Attach the table spacer 50.
• Attach the table spacer 50, and fix it with a 10mm spanner.
8
Attach the assembled vacuum table on the main body.
(1) Attach the vacuum table on the original position, and insert the connector for the vacuum fan.
(2) Turn on the power supply.
• When you change the table spacer, the height of the vacuum table changes as below:
When using table spacer 100 When using table spacer 50
100mm
50mm

MIMAKI UJF-3042HG Specifications

General

Brand	MIMAKI
Model	UJF-3042HG
Category	Printer
Language	English