Special Imaging Modes
11-23
Operation
z Position Adjustment
When the M-mark line is activated, move the trackball left and
right to adjust the position. The direction is recognized by the
arrow at the end of the line.
z Angle Adjustment
When the M-mark line is activated, move the trackball to
adjust the fulcrum of the line, and adjust the angle via the
[Angle] in the soft menu or the multifunctional knob.
The adjusting angle range is 0-360.
z Display
Description This function is to adjust the display of the images when there
is more than one M-mark line.
Operation Adjust through the [Display] item in the soft menu or menu.
You can choose to display image of the current M-mark line or
the all.
To Next Page
Loading...
Need help?
General
