Exam Types
9-5
After an exam type is selected,
1 Click [Rename] to change the name of the user-defined exam type,
2 Click [Up] or [Down] to move the position of the exam mode.
3 Click [Copy] to copy the parameters of the selected exam type.
4 Select a second exam and, click [Paste] to paste the copied parameters to the
secondly-selected exam type.
5 Click [Export] to open the screen to store the parameters of the selected exam types.
6 Click [Load] to open the screen to load the parameters of the exam type.
7 Click [Export All] to open the screen to store the parameters of all exam types for the
current transducer.
8 In addition, you can preset measurements, comments, body marks and image
parameters for the exam types.
To Next Page
Loading...
