Mindray M5

IV
6. The purpose of this system is to provide physicians with data for clinical diagnosis.
7. It is the physician’s responsibility for diagnostic procedures. Mindray shall not be liable for
the results of diagnostic procedures.
8. Important data must be backed up on external memory media.
9. Mindray shall not be liable for loss of data stored in the memory of this system caused by
operator error or accidents.
10. This manual contains warnings regarding foreseeable potential dangers, but you shall
always be alert to dangers other than those indicated as well. Mindray shall not be liable
for damage or loss that results from negligence or from ignoring the precautions and
operating instructions described in this operator’s manual.
11. If the manager for this system is changed, be sure to hand over this operator’s manual to
the new manager.
Introduction
This operator’s manual describes the operating procedures for this diagnostic ultrasound
system. To ensure safe and correct operations, carefully read and understand the manual
before operating the system.
1． Notation Conventions
In this operator’s manual, the following words are used besides the safety precautions (refer
to "Safety Precautions"). Please read this operator’s manual before using the system.
NOTE:
Indicates information of interest to users of this system as to
exceptional conditions or operating procedures.
CAUTION:
The diagnostic ultrasound system is not intended for
ophthalmic use. Its use in this clinical specialty is
contraindicated.
2． Operator’s Manuals
You may receive multi-language manuals in compact disc or paper. Please refer to
English manual for latest information and register information.
The content of the operator manual, such as screens, menus or descriptions, may be
different from what you see in your system. The content varies depending upon the
software version, options and configuration of the system.
1) Manuals on Paper
z
Operator’s Manual [Basic Volume]
Describes the basic functions and operations of the system, safety precautions,
exam modes, imaging modes, preset, maintenance and acoustic output, etc.
z Operator’s Manual [Advanced Volume]
Describes measurement preset, measurements and calculations, etc.
z Operator’s Manual [Acoustic Power Data and Surface Temperature Data]
Contains data tables of acoustic output for transducers.
z Operation Note
Contains quick guide for basic operations of the system.