Set-up & Connections
5-11
No Name
<1> Display
<2> Clips of the display
<3> Fixing belt
<4> Platform
2. To fasten the M-Pack on the shoulders of the operator:
1) Buckle up one end of one sling to the snap ring at the back of the platform, and
buckle up the other sling as well.
2) Place the two slings over the shoulders and cross them at the back of the operator.
3) Hold the two ends of the slings to pass under the armpits and buckle up the two ends
to the snap rings at the front of the platform.
NOTE: Make sure that the system is securely held before you finish buckling up the
slings and the M-Pack is completely ready for operation, and guarantee that
connections between components are sturdy, in order to prevent the system from
being dropped and damaged.
<1>
<2>
<3>
<4>
To Next Page
Loading...
Need help?
General
