Mircom FX-MNS-6000 - Equation Summary List View

103
Tag 2
Conditional
Correlatable Switches (being analogous to Input Zones) accept a
second line of 20 characters.
Equation Summary List View
This list view appears in the top, right pane when the Equation Summary item is selected in
the Job Tree view.
An equation can be attached to an empty Input Zone, an Output Circuit (not recommended)
or a Timer. This list view summarizes all of the equations defined for the job.
The table describes all of the columns in the list view. Some advanced or system columns
are hidden by default.
Name
Visible Description
Equation No
Yes Internal Equation Number.
Equation
Name
Yes The 20 character name of the equation.
CKT_TYPE
No Internal circuit type.
Controlled
Type
Yes
The type of circuit (Input, Output or Timer) that is the subject of
the equation.
Node No
No The Node No (does not apply to Timer).
Node
Yes The Node Name (does not apply to Timer).
Loop
Yes
The Loop Number or the lowest Loop Number on the CPU if the
Equation activates an Input Zone (does not apply to Timer).
Address
Yes The address of an output or input zone. The number of a Timer.
Process Type
Yes
The process type. Applicable only
when the equation is controlling
an output directly.