146
Delete Item
Use this command to delete selected items. You will be prompted to confirm the deletion.
The effect of the delete command varies according to what item in the job is selected.
By selecting an item in the Job Tree, you can delete an Annunciator, Loop Controller or
Display Adder from the job.
If you navigate to the Device List View and select one or more devices, they will be deleted.
If the Devices are conventional circuits, then the whole group of circuits will be deleted.
If you navigate to a Display List and select an item for deletion, its assignment will change to
un-assigned.
Correlations can also be removed by selecting them on the Correlation View.
Modify Item
Use this command to modify selected items.
The effect of the modify command varies according to what item in the job is selected.
If you navigate to any list view, select a row and click Modify the first editable cell in the row
will open for editing. If the cell is a multi choice cell, then a drop down box will appear. If the
first editable cell in the row is a text field, it will be selected and opened for editing. You can
change the contents and press Enter or Tab to accept the change. The next editable cell in
the row will now be selected for editing. You can press Esc if you do not need to change any
more values in the row.
Some cells have custom edit controls. An example is the Code of a device on a job where
the Coded Signals option has been selected.
If you have not yet unlocked the job against unintentional edits (see Edit), you be prompted
to do so.
Copy
Use this command to copy selected items to the clipboard to be pasted in other locations.
Note: If you copy Addressable devices to the same or another loop, they will receive the
lowest available address. (To retain the address on loop to loop copies use Paste Special)
See Copy and Paste for full details.
To Next Page
Loading...
Need help?
General
