46
Disable Audio Synchronization – when checked, audio synchronization between nodes is
disable. When un-checked audio is synchronized between the nodes.
Paging has priority over automatic alarm – when checked, FleX-Net™ system with paging
will have priority over alarm: if PTT (PushToTalk) is active during alarm the paging is not
disabled. When un-checked the paging does not have priority over automatic alarm.
Splitter Circuit Operation – enables the use of Class D amplifiers, used with suite silence.
PTT Released Delay - If strobes are correlated to the Page Ready status, such that they
operate when PTT is pressed, they will continue to operate for the specified number of
seconds after PTT is released, if a non-zero delay is configured.
Digitized Message Delay - This will cause a delay (in seconds) on the de-activation of the
node and common Page Ready status when PTT is release or when a message playing on
the paging channel end. The statuses can be used to delay strobe de-activation.
Push to Talk Priority - Choose between None (first come, first served) and Lowest Node ID,
where the PTT on the lowest addressed network node has priority over all others.
Note: Any data changed by the user will be recorded in the database when User clicks OK
button (that closes this Dialog), or Apply button (Dialog remains opened). Cancel button will
revert all User entered but not saved data.
Backup Database
To access this dialog, select Backup Database from the File Menu.
Backup database makes a copy of the Master Database.
By default the backup is made in the File folder specified in the User Preferences. The
backup file by default will have a name of the form YYYY-MM-DD-Vnn-nn-nn.mdb (the "n"s
standing in for the digits in the version number of the current configurator).
To Next Page
Loading...
Need help?
General
