30
Advanced Panel Information Dialog
To access this dialog, select Panel Information from the Panel Menu, and then click on the
Advanced button.
This dialog polls all the nodes and CPUs on the panel and checks their status against the
configuration. This dialog is available from the Panel Information dialog, which is open by a
command on the Panel Menu.
The following information is displayed for each CPU on the network:
• Node
• CPU/Address
• Type - CPU Type
• Version - current firmware version (n/a for RA1000)
• Language - language in firmware (standard messages/menu etc.)
• HW Type - "BF_Base" or "Exp. Master" for the Large board
• HW Vers - currently always VX.X.X
• Status - one of the following
o Online
o Not responding
o Wrong type (configured as "xxxx" )
o Unconfigured CPU
o Firmware version mismatch.
o Address mismatch (configured as node xx).
o Offline trouble: xxx xxx
• Config Version GUID
To Next Page
Loading...
