Mircom FX-MNS-6000 User Manual

106
Tag
The Tag label assigned to the device.
Input Zones
The list view displays the Input Zones. Input Zones are used to combine multiple input
circuits into zones which can then be correlated to signals and other outputs and to display
LEDs, etc.
Some columns containing advanced or internal information are normally hidden. They are
listed as Visible / No in the following table. Other columns are conditionally visible.
Name
Visible
Description
Addr
No
A sequentially assigned zone address. Allocated for
consistency with
other loop types.
Lp
No
Loop Number. Not meaningful for zones
Lp Addr
No
A sequentially assigned zone number or address.
Ckt No
No
An internal, sequentially assigned number.
Ckt No
CPU
No
An internal, sequentially assigned number: the
CKT_NO within the
CKT_IPT_ZONES.
Device
Yes
Always Input Zone.
Type
Yes
The process Type (Alarm, etc.) of the Zone. Can be edited (combo box).
SubType
Yes
Additional refinement of the type. Always has a value of "None" for
Input Zones.
Priority
Yes
Specifies the priority to be given to digitized messages correlated to this
input zone. Choose from a range or priorities.
-19 (lowest) through
Normal (default) to +19 (Highest). Activation of a zone with a higher
priority will cause its message to be play
ed, and any lower priority
message will cease to play.

Mircom FX-MNS-6000 Specifications

General

Brand	Mircom
Model	FX-MNS-6000
Category	Fire Alarms
Language	English